Dropping 100k for a new Z06 Corvette might not be in the budget - but thanks to the ACS design team your C7 Corvette can now turn heads by sporting the wicked Aero 3 Z06 Corvette front splitter. Inspired by the looks of the factory Z06 Corvette, the ACS team developed a new spoiler to fit all C7 Corvette models and in combination with their optional winglet/deflectors these spoilers will add the Z06 look to any C7 Corvette. Like the Z06 look - stick with the Stage 2 deflectors. Looking for the full blown Aero 3 race car design - upgrade to the Stage 3 deflectors!
ACS's C7 Corvette Z06 Corvette front spoiler fits like an OEM part and is available in your choice of options. Primer spoilers are ready to be painted to match your Corvette's exterior color. Spoilers are also available pre-finished and ready for installation in Carbon Flash Metallic (matches factory trim package) or Satin Black. Z06 front spoilers include all necessary mounting hardware to complete the installation. Specify color when ordering.
Check out these features of the ACS Z06 Corvette front spoiler:
- Manufactured in an OEM-validated RTM composite material
- Utilizes OEM mounting points used to ensure easy assembly
- Will not lower the front ride height of the car
- Includes Road Guard protective coating sprayed on inner surfaces for longevity and show finish
The ACS Z06 Corvette front lip spoiler is available with optional Stage 2 and Stage 3 winglets or side deflectors to complete the look on your Corvette. Stage 2 winglets fit both C7 and C7 Z06 models. Stage 3 deflectors have been designed for specific models. Z06 Stage 3 deflectors emulate the factory Aero 3 spoiler. For C7 base owners ACS has designed a custom Stage 3 deflector to allow for base model to adorn this absolutely wicked spoiler. See part # F-729 for Stage 2 deflectors, F-730 for base model Stage 3 and F-731 for Stage 3 Z06 fitment.
ACS's C7 Corvette front spoiler is manufactured using RTM (Resin Transfer Molding) technology, which creates an OEM quality Corvette part. Fiberglass is injected into a mold and then compressed under high pressure. This manufacturing method creates a panel that is smooth on both sides with a consistent thickness across the entire surface. The controlled fiberglass/resin composition of RTM, reduces cure times and eliminates the possibility of "wet" parts being removed from the mold prematurely. All of which is impossible with the standard hand laid process. Panels are then trimmed using a CNC robotic water jet for a clean, smooth cut on every part. The result is better fitting panel, reducing body shop installation and fitment times.
Note: Images show the Z06 front lip spoiler with the winglets installed - however the winglets are sold separately. See additional part numbers for Stage 2 and Stage 3 designs.